Fusion

Fusion is all the best parts from other designs I have made over the years formed together into a single cut. Fusion is a defined by blends between angles and curves whist still being comfortable to ware and to sit. The neck cuts deep into the body to allow access to all of the fingerboard, whilst still having a smooth transition through to the back.

Fusions medium size body and slightly wider waist suits both extended range and standard basses. With a choice of C or D style necks you can customise the feel to suit your playing style.

Bass Pictured ‘Wotan’

Bass # 0013

• Fusion body
• 7 string neck through.
• Single cut.
• 34″scale.
• AAA Flame Walnut body.
• Australian Myrtle Burl top and back.
• Fretted Gabon Ebony fingerboard.
• Paua block inlay with hour glass at the twelfth fret.
• 5 piece neck Birdseye centre strip, Paduk stringers, and Wenge outside.
• Nordstrand Dual coils with series, single coil, parallel switch on each.
• Delano Sonar 3 band Pre-amp with mid selection.
• Custom myrtle and Paua shell bell knobs By Devin Cline.
• High gloss Polyurethane
• Dunlop Straplocks.

Fusion is available in 5, 6, 7 string versions

Standard Options

• Neck through open back
• Two pultruded carbon neck rods
• 2 way Truss rod 4mm hex key
• Standard Scale lengths 34″ 35″ scale Lengths
• Hipshot A style Brass Bridge
• Hipshot Y3/8 Ultralight tuners
• Med/Med Nickel frets
• Wider med waist
• Full access straight treble horn
• stepped lower horn

Optional Extras

• 8, 9 strings
• C or D shape neck
• Set neck
• Fretless Lined, unlined, or side markers
• Standard Scale lengths 34″ 35″ scale Lengths
• Short scale 30” 32”
• Exotic tops
• Tone Blocked
• Inlay work
• String extenders